Steinway & Sons Announces The BWS-110 In-Wall Woofer

September 5, 2024

Press Release

The new Steinway & Sons BWS-110. The BWS-110 is a high-performance in-wall woofer specifically made for Steinway & Sons speaker installations requiring the most shallow woofer solution.

The BWS-110 is the brand’s sixth woofer model in a portfolio ranging from stackable installation woofers to the extraordinary in-room woofers featuring the trademark high-gloss piano lacquer.

Steinway & Sons bass performance from a shallow design

The BWS-110 a high-performance in-wall woofer for custom-installed Steinway Lyngdorf systems that require the most shallow in-wall solution, perfectly fitting 4 inch/10 cm cavity walls. Despite its shallow construction, it is equipped with a very capable high-excursion woofer to deliver a precise, punchy, and powerful bass. With the Steinway Lyngdorf Integrated System Approach and powered by the A1 or A2 digital amplifiers, the BSW-110 perfectly complements any Steinway & Sons in-wall, on-wall, or floorstanding loudspeaker. It can be used in-wall or custom-mounted in-ceiling and comes with a paintable, magnetically held grill to cover the woofer front.

Powerful high-excursion 10 inch woofer

The BWS-110 utilizes a patented high-excursion shallow woofer design, customized for Steinway Lyngdorf and based on an innovative voice-coil/cone geometry and suspension which allows the highest excursion from the most space-saving construction. A four-layer voice coil, an ultra-rigid dual aluminum cone, a very powerful neodymium magnet, and an extremely rigid cast aluminum basket provide impressive bass performance, matching the renowned sound quality of Steinway & Sons speakers.

FIND DEALER

Unique features

Extremely shallow high-excursion woofer

An unusually shallow and patented woofer design with a customized four-layer voice coil, powerful neodymium magnet, and stiff dual aluminum cone to allow a space-saving yet high excursion construction.

Ideal for 4 inch/10cm cavity walls

The BWS-110 is specifically made for custom installations which require the most shallow woofer solution, perfectly fitting 4 inch/10 cm cavity walls.

Rigid enclosure construction

The very rigid and sealed enclosure is made from high-quality MDF with internal bracing to avoid unwanted resonance and vibration.

Specifications

Description: Passive in-wall woofer
Woofer: 1 x 10-inch, dual aluminum cone, 4-layer voice coil, neodymium magnet
Enclosure: MDF with internal bracing, 19mm and 16mm
Frequency range:30 – 200 Hz (-3 dB)
Amplification: 1 x 400 W (A1 or A2 amplifier, 1 channel required)
Nominal impedance: 4 Ohm
Max SPL (IEC long term): 109 dB (60 V / 1 m)
Sensitivity:82 dB (2.83 V / 1 m)
Power handling (IEC long term): 300 W
Connections: Screw type (for bare wire)
Recommended placement: In-wall floor-standing, boundary woofers
Dimensions (H x W x D): 1000 x 350 x 88 mm / 39,4 x 13,78 x 3,5 inches
Weight: 16 kg / 35,3 lbs
Standard finishes: Matte black, paintable front grill

Downloads:
Fact sheet
Technical drawings
Pictures